Aviation Technical English for aircraft maintenance engineers (Авиационный технический английский язык для студентов-авитехников)

45 n. FLOW The air flows inside a double skin which acts as a heat exchanger. v. IMPART (communicate/transmit a force, a movement, etc.) + prep. TO, FROM The beam imparts the strain to the box structure. v. INGRESS (move into, enter) n. INGRESSION Water may ingress the casing under pressure. v. INSERT (place inside) + prep. INTO n. INSERT , INSERTION Insert the male plug into the socket. v. LENGTHEN (make longer [compare: shorten, widen, lighten, thicken, etc.]) n. LENGTH The cable is lengthened to avoid strain. v. LIFT (to raise, to move up, to carry) + prep. UP, UPTO, INTO Lift the aileron into position on the wing. v. MANEUVER (operate, manipulate) n. MANEUVER, MANEUVERING Maneuver the flight controls with caution on the ground. v. MOTOR (crank, rotate an engine) n. MOTORING Motor the engine to remove excess fuel. v. POSITION (put in place, mount, set) + p. IN, ON, INTO, ONTO n. POSITIONING The engine is positioned under the pylon for mounting. v. PROTRUDE (extend from not to be flush) + prep. FROM, ABOVE, BELOW Overflow drains protrude from the side of the casing.