Aviation Technical English for aircraft maintenance engineers (Авиационный технический английский язык для студентов-авитехников)

36 MODULE 3 AVIATION ENGLISH TERMINOLOGY FOR AICRAFT MAINTENANCE ENGINEERS Part 1 50 BASIC HUMANACTIONS FOR MEs (maintenance engineers) 1. Study the following 10 verbs, their meanings and the examples of usage. APPLY (put into application [instruction], put into action [brakes, pressure etc.], put on [paint, varnish etc.]. Apply the AMM procedure. Sealant is applied every 500 hours. The pilot applies the brakes. BEND (curve, put under tension, set at an angle). The hose is bent for installation on the landing gear. BLANK (close an opening temporarily with a cap, cover, plug etc.). After PTU removal, blank the disconnected pipes. CANCEL (suppress, stop, annul, destroy, clear). The audio cancel push-button stops the aural warning (chime, bell, horn etc.). CARRY OUT (do, execute, perform an action). The mechanic carries out the operational test of the HF system. CHECK (verify, make sure, test). Check the phase sequence before cutting in the GPU.